Capabilities
Built for parts that
have to be right.
Three machining disciplines under one roof, so your part runs on the process that suits it.
Swiss-Type Machining
Swiss-type machining is what we’re known for. It’s the best way to make small, complex parts that have to be exactly right, because each part is finished in a single run — turned, milled, drilled and threaded without ever leaving the machine. Ten of our lathes are dedicated to this work, handling bar stock up to 38 mm.
- Bar capacity up to Ø38 mm
- Guide-bushing support for long, slender geometry
- Live tooling — mill, drill & thread in-cycle
- Done-in-one: no secondary operations
- Lights-out capable for production volumes
- Prototype quantities through full production runs
Machines in this cell
| 1× | Hanwha XD38 | Ø38 mm bar capacity |
| 4× | Hanwha XD26 | Ø26 mm bar capacity |
| 5× | Hanwha XD20H | Ø20 mm bar capacity |
CNC Turning
Our turning department pairs decades of craftsmanship with a modern six-machine fleet. Flats, holes and threads are finished right on the machine — no second setup, no lost accuracy, no added lead time. Whether you need one prototype or a recurring production release, the process is dialed in and documented so part one thousand matches part one.
- Y-axis live tooling for off-centre features
- Twin-spindle machining for front & back work
- Bar-fed production or chucked one-offs
- Metals and engineering plastics
- Consistent, documented repeat runs
- Prototype through high-volume production
Machines in this cell
| 1× | Haas ST-25 | Big-bore turning centre |
| 1× | Haas ST-25Y | Y-axis live tooling |
| 1× | Yang SL22 | Production turning |
| 1× | Miyano BNC-34T | Precision fixed-headstock |
| 1× | Miyano BNC-34S | Precision fixed-headstock |
| 1× | Nakamura-Tome TW-20 | Twin-spindle turning |
CNC Milling
For us, precision isn’t just a number — it’s a philosophy. Our milling cell is built around fast, modern Haas machining centres that turn work around quickly without giving up surface finish. From fixture plates and housings to intricate multi-face components, we machine complex shapes in both metals and plastics.
- Super-speed spindles & rapids for short cycles
- 3-axis machining of complex geometry
- Exceptional surface finishes
- Metals and engineering plastics
- Fixturing designed & built in-house
- Prototype and production quantities
Machines in this cell
| 1× | Haas DM-1 | High-speed drill/mill centre |
| 2× | Haas VF-2SS | Super-speed VMC |
Not sure which process fits?
Send the drawing.
We’ll pick the machine.
Part of quoting well is routing your part to the right cell. Upload your file and we'll come back with the best process, an honest price, and a real lead time.